Page 20
optoNCDT ILR2250
Installation and Assembly | Electrical Connections ILR2250-100-IO
5.5
Electrical Connections ILR2250-100-IO
5.5.1
Connection Options
Source
Cable/power supply
Terminal
PC1100-0,3 IO-Link A PC1000-x IO-Link
IO-Link
Master
Sensor supply is done
by peripheral.
Fig. 17 ILR2250-100-IO connection example
The IO-Link master also supplies the supply voltage (24 V DC) to the sensor.
5.5.2
Pin Assignment
The plug connection is located on the back of the sensor. It is a 723 series 12-pin circular connector (flange plug) from
the company Binder. This plug connector ensures optimum shielding as well as a high IP protection class. You will need
a corresponding cable socket with a shielding ring as the counterpart.
The PC1100-0,3 IO-Link adapter cable included consists of
-
a 12-pin cable socket, sensor connection
-
a 5-pin cable connector, PC1000-x IO-Link connection
The optionally available PC1000-x IO-Link extension cable contains an M12 plug or socket at both ends.
Both cables can be used with drag chains and have the following bend radii:
-
22 mm (once)
-
44 mm (permanent)
Signal
Sensor
PC1100-0,3 IO-Link adapter
Explanation
PC1000-x IO-Link
Pin
Wire color
Pin
Wire color
NC
A
NC
B
NC
C
NC
D
NC
E
NC
F
+
U
B
G
Brown
Supply voltage
10 ... 30 VDC, typ. 24 VDC
1
Brown
C/Q
H
Black
Standard Input/Output
4
Black
NC
K
NC
M
GND
L
Blue
Supply ground
3
Blue
NC
J
H
M
G
J
K
A
L
B
C
D
E
F
View: Solder side 12-pin
M16 cable socket
1
3
5
2
4
View: Solder side 5-pin
M12 cable connector
Fig. 18 Pin assignment for power supply and signal