MCS-THERMOSTAT
REVISION 1.5
19
12.4. MODIFY HOLIDAYS
These settings allows the user to adjust the thermostat’s “START and END’ times for holidays that
have been setup in the configuration file or thru MCS-CONNECT.
Press the Up/Down arrows and Enter buttons to make adjustments. See screen shot on previous
page as an example.
12.5. TEMP CAL
Allows the user to make changes to the temperature setting of the Thermostat
using a calibrated hand
held temperature meter to check the current temperature of the area.
Directions: Use the Up/Down arrows to move between the offset range. Press ‘Enter’ to select the
desired temperature offset and the display will confirm the change.
12.6. HUMIDITY CAL
Allows the user to make changes to the humidity setting of the Thermostat
using a calibrated hand
held meter to check the current humidity of the area.
Directions: Use the Up/Down arrows to move between the offset range. Press ‘Enter’ to select the
desired temperature offset and the display will confirm the change.
12.7. DISPLAY TEST
Allows the user to test the thermostat to make sure all icons are working.
12.8. ADJUST BACKLIGHT
Allows the user to adjust the backlight setting from 25% to 100%.
12.9. STANDBY BACKLIGHT
Hit ‘ENTER’ - Allows user to make changes to the backlight - OFF or 25% to 100%
12.10. ADJUST TIME
Allows the user to change the displayed time from the MCS-THERMOSTAT.
Directions: Use the Up/Down arrows and Enter button to first adjust the hour per a 24-hour
schedule (ex. 1:00am is 0100 and 1:00pm is 1300) and press ‘Enter’ to move on to the minutes.
After adjusting the minutes, press ‘Enter’ to move on to the seconds. Press ‘Enter’ to complete the
time adjustment.
12.11. ADJUST DATE
Allows the user to change the displayed date from the MCS-THERMOSTAT.
12.12. THERMOSTAT RESET
Hit ‘ENTER’ to update-’RESTARTING THE UNIT’
12.13. SOUND ALARM
Hit ‘ENTER’ - Allows the user to turn alarm on or off.
