Micrel SY87729L Скачать руководство пользователя страница 12

12

SY87729/39L

 Evaluation Board

Micrel, Inc.

M9999-071906
[email protected] or (408) 955-1690

Item

Description

Qty.

C1

22

µ

F, 16V “C” Size, Tantalum Electrolytic Capacitor

1

C2, C3, C4, C5

100nF, 10V X7R Size 0603 Ceramic Capacitor

4

C6, C7, C8

0.1

µ

F, 10V Size 0805, Ceramic Bypass Capacitor

9

C9, C10, C11
C12, C13, C14

J1

Banana Jack Binding Post, Yellow or Red

1

J2

Banana Jack Binding Post, Black

1

J3–J8

SMA Edge Launch Connector

6

J9

Centronics 36-Pin Right Angle Connector

1

L1

Ferrite Bead, Size 0805

1

R1, R2

2.00k

, 1% Size 0603, 1/10W Resistor

2

R3, R4, R5

51.1

, 1% Size 0805, 1/10W Resistor

3

R6, R7, R8

10k

, 1% Size 0805, 1/10W Resistor

3

R9, R10

2.21k

, 1% Size 0805, 1/10W Resistor

2

R11

475

, 1% Size 0805, 1/10W Resistor

1

R12, R13

121

, 1% Size 0603, 1/10W Resistor

2

R14, R15

In-Line Place to Install Optional Back-Termination Resistors

2

U1

Micrel's SY87729/39L Frequency Synthesizer

1

U2

5V Tolerant Dual 4-Bit Buffer

1

U3

27.000MHz Oscillator with Differential, LVPECL Outputs, DIP-14

1

BILL OF MATERIALS

ORDERING INFORMATION

Evaluation Board Part#

IC Package

Operating Range

SY87729L–EVAL

EPAD-TQFP-32

–40

°

C to +85

°

C

SY87739L–EVAL

EPAD-TQFP-32

–40

°

C to +85

°

C

MICREL, INC.

2180 FORTUNE DRIVE

SAN JOSE, CA 95131

USA

TEL

 + 1 (408) 944-0800  

FAX

 + 1 (408) 474-1000  

WEB

 http://www.micrel.com

The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.

Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can

reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s

use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify

Micrel for any damages resulting from such use or sale.

© 2002 Micrel, Incorporated.

Содержание SY87729L













Отзывы: