Michell Instruments XZR500ST, Руководство пользователя

Страница: 36 / 78

XZR500 User’s Manual
28 97137 Issue 8, April 2017
OPERATION
Cell self-cleaning
Cleaning cell
0.00
This function allows the analyzer to self-clean
the sensor cell. The cleaning process lasts for
one hour. The furnace is heated to 780°C in
order to clean itself and the MSRS. Remove the
inner probe tube to make the self-cleaning more
ef fi cient.
NOTE: During self-cleaning, the output
signal will be locked at the fail-safe value
If cell cleaning is not required, leave the value
at 0.00 and press the [*]
Enter
key to skip this
procedure and go back to the default display.
If cell cleaning is required, press the [+] and [–]
keys to adjust the value to 0.10 and press the
[*]
Enter
key to start the process. The following
messages will appear:
Temperature Oven
Low alarm
Cleaning cell
End of control?
The process can be stopped by pressing and
holding the [*]
Enter
key or it will stop
automatically after the above 60 minute process
is completed. Once the cleaning process is
fi nished the furnace will start to cool down.
Cleaning cell
60 min
After about 10 minutes the temperature will
return to the set temperature.
Cleaning cell
cooling
Cleaning cell
10 min
Temperature Oven
xxx.x°
C