Michell Instruments Promet I.S., Руководство пользователя

Страница: 45 / 78

Promet I.S. User’s Manual
Michell Instruments 37
OPERATION
3.6 Fault Alarm Set-Up
There are four conditions for the system’s fault alarm which can be con fi gured in the
FAULT
– fault alarm settings sub-menu.
From the Main Reading Page, press
Menu
to enter the main menu. Use the
Select
key
to scroll to the
FAULT
option.
S K I P
F A U L T
The top line shows the navigation command. Press the

key to change the navigation
command from
SKIP
to
ENTER
.
E N T E R
F A U L T
Press the
Select
key to con fi rm the navigation command and to either skip to the next
sub-menu or enter the
FAULT
– fault alarm settings sub-menu.
The fi rst setting parameter under this sub-menu is for the minimum dew-point fault
alarm set-point.
3.6.1 Minimum Dew-point Value for the Fault Alarm
- 1 0 0. 0 C
M I N _ D P
This is the minimum dew point below which the fault alarm will be activated.
a. Increase or decrease the value by pressing the

and

keys.
b. When the desired set-point is on the display press the
Select
key to
con fi rm. The display will then change to the next setting parameter - the
maximum dew-point fault alarm set-point.
NOTE: This fault alarm set-point can only be set in °Cdp, no matter what unit
has been selected for the Main Reading Page.