Activate the battery function
When a protected lithium battery requires activation
the charger will attempt to perform battery activation
automatically, according to the standard
charging method. If the charger can not activate
the battery will be considered to be damaged or
responding channel prompt " " and stop
charging.
Repair lithium battery function
When the lithium battery is discharged to 0V, the
charger will use trickle charge method to repair,
the battery voltage will slowly increase, repair OK,
enter the normal charging mode. If the battery
voltage can not be raised for a long time, the char-
ger will display " " and stop charging.
When the battery is full, the charger will
immediately stop charging automatically
to prevent overcharge
High sensitivity -
△
V to determine the battery
charging saturation (Ni-MH / Ni-Cd battery)
When the battery is fully charged, the LCD
screen will display " " battery capacity
percentage " " charge current " " charger
automatically stop charging, to prevent the battery
because of overcharge and shorten the battery life.
A high sensitivity -
△
V battery charging termination
method is in use for Ni-MH/Ni-Cd batteries. It can
automatically detect when the battery has reached
full capacity.
Power Bank function
1. If the charger is not connected to external
power supply, and battery voltage is greater
than 3.30V in any channel, the charger will work
in the mobile power mode, providing USB maxi-
mum output of 5V / 1A.
2. When the two channels have lithium batteries
having voltage of 3.3V or more the charger will
automatically select the higher-voltage battery
priority power supply output until the battery
voltage is lower than 3.30V, and automatically
switch to another battery when the first one is
drained.Long press the SLOT button, you can
manually switch the battery, LCD will blink once
in order to confirm battery switch.
3. During power bank function the LCD screen will
display battery channel and USB output
current.
