Operating Instructions
Battery percentage
Battery Capacity
Switch the display channels
Voltage / internal resistance / current / temperature
“ ”
Flickering:
The data indicates the accumulated capacity
volume of the battery which was charged by the
charger.
“ ”
Constant shinning:
The data indicates the battery’ s total capacity (the
total capacity of the battery which was calculated
according to the cumulative capacity by charger).
Put the battery in any channel, the charger will
display the battery internal resistance automatically.
Short press key to switch the channel (C1 / C2)
information display.
LCD backlight
Press the button to turn on the LCD backlight,
if there is no operation, LCD backlight will gradually
darken in 1 minute.
1. Put the battery in any channel, the charger starts
to detect battery-related data and display it on
the LCD screen. After 5 seconds, the most
suitable current charge (maximum 3.0A, minimum
0.1A) is automatically selected according to the
battery characteristics.
After battery was placed in one of the charging
slots, the battery percentage will display automati-
cally.
When
charging
When fully
charged
Charging
voltage
Charging
current
Battery
voltage
Internal
resistance
Temperature
Switch
display
Battery detection and error alarm
Battery activation and detection
When the battery is reversed
When the battery is shorted
Error warning
Current channel
shows “ ”
Correctly put into the battery, check is OK, enter
into the normal state of charge.
