12
32D1999
LOG PLACEMENT
IMPORTANT:
Remove logs, handling carefully by holding gently at each end. Gloves are recommended to prevent
skin irritation from ceramic fibers. If skin becomes irritated, wash gently with soap and water.
LOG PLACEMENT
Figure 12 - Placing Left Log (#3)
Left Log (#3)
1. Install the rear log (#1) on the two locating pins of
base.
See Figure 9.
Visually check to verify the log
is securely placed on the pins and in contact with the
grate.
See Figure 10.
2. Install the right log (#2) on top of the control cover.
Slide the log back until touching the rear log (#1).
Visually check to verify the log is resting on the grate
and control cover.
See Figure 11.
3. Install the left log (#3) with its bottom groove resting
on the right side of the grate bar. Slide the log back
until touching the rear log (#1). Visually check to verify
the log is resting on the grate.
See Figure 12.
4. Install the top log (#4) with the base sitting on the
rear log (#1) and the top sitting on log (#4). Visually
check to verify the log is resting on the rear log (#1)
and left log (#3).
See Figure 13.
Figure 13 - Placing Top Log (#4)
Top Log (#4)
Figure 10 - Placing Rear Log (#1)
Rear Log
(#1)
Figure 11 - Placing Right Log (#2)
Right Log
(#2)
Figure 9 - base
Locator
Pins
Control
Cover
Bottom
Groove
DUzY II VDY24/18D2A LOG INSTALLATION SEQUENCE:
