8
32D1999
PLACING AND SECURING APPLIANCE
Figure 4 - Securing Heater to Floor of Fireplace/Firebox
Left Side
Mounting
Hole
INSTALLATION
ASSEMBLY PROCEDURE
1. Center the gas log unit in the fireplace or firebox. Make certain the front feet of the grate sit inside the front
edge of the fireplace or firebox.
2.
See Figure 4
for hole locations. After centering the grate correctly, mark the hole positions on the fireplace/
firebox floor. Drill two (2)
5
/
32
" diameter holes approximately 1
1
/
2
" deep.
3. Anchor the grate to the fireplace/firebox floor using the screws provided.
See Figure 4.
Proper installation of the grate is essential to prevent any movement of the gas logs and controls
during operation.
Right Side Mounting Hole
W
ARNING
You must secure the gas log heater to
the fireplace floor. Properly securing
the grate prevents movement of
the entire unit when you adjust the
controls. Grate movement could
cause a gas leak.
