MHS Boilers XenoROL XR40, Инструкция по установке, эксплуатации и обслуживанию, Страница: 7 / 84

XenoROL®
7
EQUIPMENT WARRANTY
MHS Conveyor
warrants that the material and workmanship entering into its equipment is
merchantable and will be furnished in accordance with the specifications stated.
MHS Conveyor
agrees to furnish the purchaser without charge any part proved defective within 2
years from date of shipment or before the equipment has forty-one hundred (4100) hours of
running use, whichever period is shorter, provided the purchaser gives
MHS Conveyor
immediate
notice in writing and examination proves the claim that such materials or parts were defective when
furnished. For drive components specific to XenoROL® (i.e. Xeno belts, slave Xeno belts, drive
spools, standard and speed-up, and spacers), this warranty shall be extended to five years or ten
thousand (10,000) hours of running use, whichever period is shorter, provided the conveyors are
applied, installed and maintained in accordance with
MHS Conveyor
published standards. Other than
the above, there are no warranties which extend beyond the description on the face hereof.
Consequential damages of any sort are wholly excluded.
The liability of
MHS Conveyor
will be limited to the replacement cost of any defective part. All
freight and installation costs relative to any warranted part will be at the expense of the purchaser. Any
liability of
MHS Conveyor
Systems under the warranties specified above is conditioned upon the
equipment being installed, handled, operated, and maintained in accordance with the written
instructions provided or approved in writing by
MHS Conveyor
.
The warranties specified above do not cover, and
MHS Conveyor
makes no warranties which extend
to, damage to the equipment due to deterioration or wear occasioned by chemicals, abrasion,
corrosion or erosion; Purchaser's misapplication, abuse, alteration, operation or maintenance;
abnormal conditions of temperature or dirt; or operation of the equipment above rated capacities or in
an otherwise improper manner.
All equipment and components not manufactured by
MHS Conveyor
carry only such warranty as
given by the manufacturer thereof, which warranty
MHS Conveyor
will assign or otherwise make
available to Purchaser without recourse to
MHS Conveyor
, provided that such warranty is
assignable or may be made available.
IMPORTANT
For service on motors, reduction units, electrical components, controls, air or hydraulic cylinders,
contact the local authorized sales and service representative of respective manufacturer. If none is
available in your locality, contact the
MHS Conveyor
representative.
MHS Conveyor
will not
be responsible for units that have been tampered with or disassembled by anyone other than
the authorized representative of the respective manufacturer.
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EXTENDING
BEYOND THOSE SET FORTH IN THIS STATEMENT OF WARRANTY.
Rev 04/08/2009
90480006rev092010