MHS Boilers REGENCY 2 G100/110IE Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

MHS Boilers REGENCY 2 G100/110IE Скачать руководство пользователя страница 3

3

REGENCY2

L O W

P R O F I L E

1.0 general

These instructions are designed to assist the installation and servicing engineer with the installation and

maintenance of the Regency 2/G100IE series central heating boilers.

These atmospheric gas fired boilers are floor standing and suitable for heating large dwellings,

commercial or industrial buildings. They are designed for use on pumped circulation systems, hot water
production through calorifiers, indirect cylinders, plate heat exchangers or any other indirect method of hot
water generation.

The Regency 2 G100IE series boilers, are open flued, low profile, natural draught central heating

appliances, with outputs ranging from 32 to 126 kW.

Models G100IE are fully automatic spark ignited appliances with flame safeguard via flame ionisation.

Models G100/90IE and G100/110IE are two stage high/low firing appliances.

conformity statement

Regency 2 boilers are manufactured to the highest standard of quality, performance and safety, in

accordance with EC standards. The Regency 2 boilers carry the CE mark.

installation requirements

The installation of Regency 2 boilers must be in accordance with the relevant requirements of Gas

Safety (Installation and Use) Regulations 1994, Health & Safety at Work Act, Building Regulations, I.E.E.
Regulations, Construction (Design & Management) Regulations 1994, Local Authority Bye-Laws, Local and
National Water Bye-Laws, Fire Authority Regulations and Insurance Company requirements.

The following Codes of Practice are also applicable:-

•

BS6798: 1987 Specification for installation of gas fired hot water boilers of rated input not
exceeding 60kW.

•

BS6880 Code of Practice for low temperature, hot water heating systems of output greater than
45kW. Parts 1, 2 and 3: 1988.

•

CP342 Part 2: 1974 Code of Practice for centralised hot water supply.

•

BS6644 1991 specification for gas fired hot water boilers of rated inputs between 60 kW and 2 MW.

•

IGE/UP/2 Gas installation pipework, boosters and compressors on industrial and commercial
premises.

•

CIBSE Guide Reference sections B7, B11 and B13.

•

BS5440 Installation of flues and ventilation for gas appliances of rated input not exceeding 60kW.
Part 1: 1990 Specification for the installation of flues.

•

BS5440-2: 2000 Installation and maintenance of flues and ventilation for gas appliances of rated input
not exceeding 70kW net (1st, 2nd and 3rd family gases) Part 2: Specification for installation and
maintenance of ventilation for gas appliances.

•

British Gas IM/11 Flues for commercial industrial gas fired boilers and air heaters.

«
1
2
3
4
5
...
»

Содержание REGENCY 2 G100/110IE

























Отзывы:

Нет отзывов