Operating Instruction MHM Flash Cures
Operating instructions MHM Flash Cures.docx
Page 5 of 17
2.3.
Safety Instructions for the Operating Staff
All cabinets and covers of the Flash Cure must always be kept closed. Open
cabinets and covers are extremely dangerous as live electrical components are
accessible.
Mechanical or electrical failures must only be repaired by an MHM authorized /
approved technician.
Any modifications or changes to the dryer settings should only be carried out by
an MHM authorized / approved technician.
2.4.
Additional Risks
Even though the MHM Flash Cure has been designed and built according to the most stringent
safety criteria, as with all machinery we have to anticipate certain additional risks, which are
detailed below:
Danger
Description
Behavior/Action
Electrical threats:
Indirect contact
(in case of defect)
Danger of life-threatening
electrical shock by indirect
contact with defective parts
carrying voltage (in particular
in case of defective insulation).
Switch off the machine with
the main switch. Isolate the
mains supply.
Hot surface
Warning: Surfaces can get hot.
Danger of burning.
Do not touch the lamps or
reflector while the unit is in
use or before it has cooled
down after switching off.
2.5.
Other Valid Rules and Regulations
The customer must comply with all regulations applicable in the country where the machine is
located.
3.
Intended usage of the machine
The dryer is designed for use in screen printing machines to cure ink with heat.
Any other use of the dryer than described above may result in danger to
persons or material damage and is therefore forbidden.
