32mm Round
End Cap
32mm Folding Net Support
M10 x 50 Hex
Head Bolt
M10 Nyloc
Back Bar Bracket
DETAIL, K
SCALE: 1 : 2
DETAIL, L
SCALE: 1 : 2.5
DETAIL, M
SCALE: 1 : 2.5
DETAIL, N
SCALE: 1 : 2.5
DETAIL, P
SCALE: 1 : 2.5
DETAIL, R
SCALE: 1 : 2.5
K
L
M
N
P
R
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
SHEET
5 OF
8
REVISION
1
Instructions for ALL
Folding Goals
MH Goals Ltd,
Ellough Industrial Estate,
Beccles, Suffolk,
NR34 7TD
Parts Required
Step 3 -
To attach the back bar bracket take the net supports and lay them flat in a mirrored configuration.
Then take the M10 x 50 hex head bolt and put it through the hole towards the bottom corner of the net support, shown in Detail M, do this from the outside of the goal.
Take one of the back bar brackets, placing it over the bolt so that the flat side is against the net support so that the bracket is on the inside of the net support frame as shown in
Detail M.
To secure the bracket in place fasten using a M10 Nyloc as shown in Detail M, so that the final product looks like Detail P.
To conform with the latest safety standards the supplied 32mm round end caps must be placed into the open ends of the net support, these simply push into position as shown in
Details K & L so that it looks like Details N & R