ASX-1 Operating Manual
Page 3
3.1 Start/Stop Flight display
Press the F1 key during the normal display mode to manually start/stop a flight. This key is only active if the ASX-1 is
setup to select the manual flight option under the log book setup menu.
3.2 Flight time and air distance display
This display can be accessed by pressing the F2 key during the normal display mode. Use the up/down keys or the rotary
control to select “reset air dist” to reset the air distance counter. The flight time is automatically reset when a new flight is
started. The air distance trip counter can still be reset manually even if the pilot selects the automatic resetting of the air
distance trip counter.
4 Menu System
Pressing the rotary control button during the normal display mode will cause the ASX-1 to enter the menu system. Use
the up/ down keys or the rotary control to navigate through the menu system.
Note:
The air distance trip counter measures distance flown through the air. This is not the same as
distance flown over the ground unless you are flying at sea level at zero wind speed. The air
distance shown is subject to under reading at altitude due to decreased air density.
