MGI MGISTP-3000, Руководство пользователя

Страница: 37 / 51

Maintaining the devic
e
30
Cleaning and disinfecting the device
z
We do not recommend that you use the disinfectants other than 75%
alcohol. Because other disinfectants are not verified for use and their
effects to the device are unknown.
z
If you have questions about the compatibility of disinfectants, contact the
technical support.
Auto cleaning and disinfection
The device is equipped with air filter and UV lamps. You should
perform cleaning and disinfection before and after each experiment,
to ensure that the cleanliness of the interior of the device and to
avoid cross contamination.
Post-experiment cleaning and disinfection
Ensure that the dust-free wipe is wet but leaves no droplets.
Performing cleaning
After each experiment, perform the following steps:
1. Wipe the surfaces of the device, operation deck, and pipette with
a dust-free wipe moistened with Milli-Q water or pure water.
2. Let the device air-dry.
Performing disinfection
After each experiment, perform the following steps:
1. Wipe the surfaces of the device, operation deck, and pipette with
a dust-free wipe moistened with 75% alcohol.
2. Select
Clean
in the menu and run the workflow.
Weekly disinfection
Every week, perform the following steps:
1. Wipe the surface of the device, handle of the door, and inner walls
with a dust-free wipe moistened with 75% alcohol.
2. Wipe the preceding components with a dust-free wipe moistened
with Milli-Q water.