MGI MGISTP-3000, Руководство пользователя

Страница: 27 / 51

Getting started
20
The device contains precise components. Therefore, anti-shock and
anti-tilt labels are posted on the outer packaging to monitor any
effects of transportation.
The following table describes indicator statuses on the label:
Table 1 Indicator status
Label Indicator status Description
Anti-shock
label
Remains
unaffected
Indicates that the device is intact
and no strong collision occurs during
transportation, or the intensity does
not exceed the limit.
Red
Indicates that the device might not
be intact and a strong collision occurs
during transportation and the intensity
exceeds the limit.
Anti-tilt label
Remains
unaffected
Indicates that no tilt occurs, or the
gradient does not exceed the limit.
Red
Indicates that tilt occurs, and the
gradient exceeds the limit.
Preparing the power supply
z
To ensure a steady and uninterrupted power supply to the device during
operation, we recommend the use of a separate UPS. For details about the
UPS installation protocol, consult the UPS supplier.
z
The required power supply of the UPS should be no less than 1000 VA.
Connect the power cord of the device to the output port of the UPS.
z
Ensure that the voltage meets the requirement to prevent poor
performance of electronic components. Failure to do so might damage
electronic components.
Item Description
Voltage and frequency range 100 V - 240 V ~ , 50/60 Hz
Voltage fluctuation
±
10%
Grounding resistance < 4 Ω
Rated power 600 VA
Transient over-voltage category II