![mFi Mason-Lite LMFP-108 Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/mfi/mason-lite-lmfp-108/mason-lite-lmfp-108_instructions-manual_1782275031.webp)
31
Lighting and Operating Instructions
Lighting and Operating Instructions
FOR YOUR SAFETY, READ BEFORE LIGHTING
WARNING
: If you do not follow these instructions exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.
Do not use this gas appliance if any part has been underwater. Immediately call for a qualified professional service technician to
inspect the appliance and to replace any part of the control system and any gas control which has been under water.
The Mason-Lite burner system has a pilot which can be lit by hand using a match or lighter. When lighting the pilot, follow these
instructions exactly.
BEFORE LIGHTING
, smell all around the burner area for gas. Be sure to smell next to the floor as some gas is heavier than air and
will settle on the floor. IF YOU SMELL GAS, FOLLOW THE INSTRUCTIONS ON THE COVER (P. 1).
TO LIGHT THE APPLIANCE WITH THE WALL SWITCH
Move the ON-REMOTE-OFF wall switch to the
ON
position
(
Figure 52
). This transmits a rapid series of sparks at the pilot
head and will ignite the gas.
TO SHUT DOWN THE GAS APPLIANCE USING THE WALL
SWITCH
Move the switch to the OFF position (
Figure 52
). The gas flow
will cease, and all flames (main burner and pilot) will go out (see
important note below).
OPERATING THE BURNER USING THE REMOTE
Move the wall switch to the REMOTE position and follow the
instructions included in the remote kit for lighting and shutting
down the attached burner.
IMPORTANT
: Do not allow the appliance opening to be blocked
in any way while operating the appliance. The appliance may be
operated with a Mason-Lite screen installed and drawn.
OO
UU
TT
IINN
PP IILLO
OTT
IINN
Figure 50
Upstream gas
pressure tap
MAINTAINING THE PILOT
Your gas appliance is equipped with a safety pilot that will shut
off the gas supply in case the pilot is not burning or functioning
properly. Regularly verify that the pilot is adjusted properly with
the pilot flame hitting the electrodes as shown in
Figure 51.
If
the pilot will not stay lit, call your local gas utility or gas supplier.
TO CHECK UPSTREAM GAS PRESSURE
Unscrew the four (4) screws above and below the control panel
face, then pull the control panel out far enough to expose the test
ports on the valve (
Figure 50
). Unscrew the port marked IN part
way and test.
CAUTION
: Do not kink the flex connectors coming from the
valve while accessing it.
Figure 51
Lighting
the Pilot
Note
: Pilot flame should encircle top of electrodes.
See instructions cover for example of proper main burner flame
pattern.
Figure 52
ON
REMOTE
OFF
Содержание Mason-Lite LMFP-108
Страница 30: ...30 LOG SET 120 Figure 49...