MINI-BIKE ASSEMBLY GUIDELINES
- 15 -
❍
Fasten the Seat to the Frame by inserting the three 1/4-20 x
5/8" bolts (Item 26) up through the Frame and into the
threaded inserts.
❍
Your assembly is now almost, but not quite, complete and
should not be operated
However If you feel like it, and, provided you do so carefully—
mini-bike upright and stationery, engine off, brake fully
engaged—let the rider mount up!—(Optional, Not Required—If
you want to keep working, by all means, proceed.)
24. ASSEMBLY & OPERATIONS REVIEW
❍
Time to review all assembly and check all operations. Then,
additional items need to be installed.
❍
First review the section entitled on “ASSEMBLY SAFETY” at
the beginning of this booklet. Review your assembly and
determine whether you have unanswered questions or
unresolved problems.
❍
Re-read each assembly step and inspect your assembly.
❍
Check all fasteners (bolts, screws, clips, clamps, etc.) to make
sure they are secured, installed, tightened, etc., properly.
❍
Check the steering operation, making certain that full-range
of operation is available and un-hindered throughout the
entire range of steering operation—lock-to-lock.
❍
Check both wheels making certain they are securely and
properly fastened to the Frame, but spin freely.
NOTE:
No additional items or accessories should be added to
the mini-bike, nor worn or carried by any rider which would
in any manner hinder operation or interfere with moveable
parts of the mini-bike including the engine.
❍
Check to see that the throttle operation is working properly
throughout its entire range of operation, including but not
limited to:
•
dummy and throttle twist grip properly installed and
securely on the handlebars?
•
full-range, smooth, un-hindered Twist Grip/Throttle
Control operation?
