MF DIGITAL 5907-VL, Руководство оператора

Страница: 7 / 23

MF Digital 5907-VL Revised 10-21-05
6
SET UP
11.1 Power On Time
After the system power is turned on, the system warm up time can
be set from 5 sec to 255 sec.
11.2 Auto Start
This feature allows the duplicator to automatically execute copying
once recordable disks are inserted to the master source disc and
writer trays. The setting can be turned off or the amount of seconds
can be set to (1~99). To execute this function, the operation mode
has to be set to COPY, TEST, VERIFY, COMPARE,
COPY&VERIFY, COPY&COMPARE.
11.3 Startup Menu
The function in the menu which will be shown first can be selected
when the duplicator is turned on.
11.4 Write Method CD duplication mode can be selected among “DAO”, “SAO”, and
“TAO”. The default mode is “DAO,” which means Disc at Once
11.5 Button Beep Gives the option to hear a beep as you press a button.
11.6 Skip Read Error Gives the option to stop duplication process when an error has
occurred or simply continue the process.
11.7 Eject on Start Allows choosing whether the duplicator system will eject the disc on
startup.
11.8 Boot Password Allows setting or changing the password at start up.
11.9 Setup Password Allows setting or changing the password for Setup.
11
11.10 Clear Setup Resets all of the operations back to manufacturer’s default
IMAGE MANAGER
Demonstrates how to perform various Hard Drive related operations.
If duplicator does not have HDD installed, the system menu will not
show this function.
12.1 Select Image Used to select an Image file as a Source to be copied to the discs.
12.2 Disc -> Image Used to copy a Source Disc to HDD to save as an Image file
12.3 Reader Speed The following function (12.2 Disc -> Image function), will allow
you to set the Reading Speed of the master source disc.
12.4 Image Info. Checks the image file information and file size
12.5 Rename Image This function renames the HDD image partition’s name.
12.6 Delete Image Deletes an image file in HDD. If the file is selected as the source
file, you will not be able to delete it unless you go back to 12.1 to re-
select the image.
12.7 HDD Info. Checks the information in HDD, such as the number of discs stored
on the HDD and the amount of space left in the HDD
12
12.8 Format HDD This feature will allow you to format the HDD. However, if HDD
image was selected as the source you will not be able to format it.