background image

CD-3706/P

 

Operator’s

Guide

Document Revision: 030501.1

5000 Series

 

Operator’s Guide

Document Revision:080504

Page 35

Creating Audio Compilation Discs

In addition to copying entire CDs, audio compilation discs can be created
one track at a time, from one or more master discs containing audio CD-
DA, Mixed Mode, or CD-Extra. This is accomplished by using the 5000
Series’ audio track import feature. The audio will be imported to the 1

st

partition of the hard drive.

To create an audio compilation disc, the steps are as follows:

 

From the main operating screen depicted below:

 

Load the master disc that contains the audio track(s) you wish to copy
into the top CD-R/RW recorder. Wait for the LED lights on the front of
all the recorders to stop flickering (this may take up to 30 seconds).

Note: 

Only one audio compilation disc can be created at one time. If

several copies are required, first create the original
compilation disc, and then copy it in the usual way.

 

Press the “5” key. The screen will now read:

 

Press the “START/YES” key. The screen will now read:

 

Press the number of the track you would like to select. Track number 1
is used as an example.

 

If you wish to make changes, press the “STOP/NO” key. If the selection
is correct, press the “START/YES” key. The screen will now read:

Содержание 5000 Platform Series


































































Отзывы: