MF DIGITAL 5000 Platform Series, Руководство оператора

Страница: 8 / 65

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
5000 Series Operator’s Guide
Document Revision:080504
Page 7
Getting Started
Carefully remove the 5000 Series duplicator from the shipping container. Inspect
the contents, and verify them against the packing slip. Report any errors in
shipping as soon as possible.
What’s In The Box
Your new 5000 Series duplicator includes:
•
5000 Series duplicator
•
Power cord
•
Firmware CD
•
Manual CD
•
MF DIGITAL Product & Warranty Registration card
Packing Materials
Please retain the original box and packaging in the event that the unit requires
future servicing. This will help to reduce the possibility of damage occurring in
transit.
The Best Place To Put The 5000
The best operating location for the 5000 Series duplicator is in a climate-
controlled area, free of dirt, dust, humidity, excessive heat, and electronic or
electromagnetic interference. Room temperature should be between 65 and 75
degrees Fahrenheit, or between 18 and 23 degrees Celsius. Place the 5000 on a
solid, steady work surface, and allow sufficient room for all incidental work
materials. Provide at least six inches of clearance on all sides of the unit for
ventilation.
Safety Precautions
The system is shipped with a three-prong power connector, and must be used with
a properly grounded AC receptacle.
DO NOT try to defeat the third “ground”
prong. All computer peripherals must be properly grounded, and the 5000 is no
exception. The use of a power conditioner, such as an Uninterruptible Power