2
3
4
5
1
36
RETAINING STRAP
The retrospective assembly of a retaining
strap is only to be carried out by a special-
ist workshop!
The retaining strap [1] serves to hold a
person sitting inside the electric travelling
wheelchair in place.
–
Additional stabilisation of the sitting
position.
–
Prevents the user from slipping for-
wards out of the seat (e.g. during abrupt
braking).
The retaining strap is guided around the
back support.
Fastening the retaining strap
Make sure that no objects are trapped
between belt and the body! – Thus you
avoid painful pressure points.
Pull both belt halves to the front and slide
the catch halves together so that they latch
together [1].
☞
Afterwards conduct a pulling test.
Opening the retaining strap
To open the retaining strap press the red
unlocking knob (2) inside the buckle.
Adjustment of belt length
☞
The retaining strap should not be
pulled too tight.
Push or pull the strap (5) in the respective
direction in order to extend or shorten the
strap.
☞
Therefore hold the lock part or buckle
(3) at a right angle to the strap.
Fasten excessive strap by repositioning the
plastic slider (4).
