Meyra Ortopedia 1.054, Руководство по эксплуатации

Страница: 14 / 56

2
1
14
DRIVE-/PUSH MODE
Only switch the electric travelling wheel-
chair to push mode when it is standing
still for positioning or in case of emergen-
cies, but not on slopes/hills.
After push mode do not forget to switch
the drive back to drive mode. Otherwise
there is the danger of your electric travel-
ling wheelchair unintentionally rolling off.
Selecting the push mode
1. Switch off the operating module be-
cause the pushing will otherwise be
made difficult by the electric system.
☞
Therefore observe chapter Operat-
ing module-functions on page 15.
2. Disengage the brakes [1].
☞
Therefore observe chapter
Releasing
the brakes
on page 13.
☞
The electric travelling wheelchair
can now be pushed.
Selecting the motor mode
1. Activate the brakes [2].
☞
Therefore observe chapter Locking
the brakes on page 13.
2. Switch the operating module on.
☞
Therefore observe chapter Operat-
ing module-functions on page 15.
☞
The electric travelling wheelchair is
now ready for use.