Meyra 1.610, Руководство по техническому обслуживанию и ремонту

Страница: 33 / 104

33
WHEELS
Wheel change
Before starting the disassembly work, support the frame to
prevent the wheelchair from tipping over and secure it to
prevent an unwanted movement or tipping over.
☞
Always change tyres in pairs.
!
Attention:
Never loosen the connection screws of the rim halves
(1) to disassemble the wheel.
– Danger of injury!
Disassembly of the wheels
Before dismantling the drive wheels the respective cover in
the middle is to be removed [2].
Take off the wheel by removing the respective wheel screw
(3).
Assembly of the wheels
After replacing/attaching the wheel secure the respective
wheel screw (3) again with Loctite 243 and tighten.
☞
Therefore observe chapter
DIN norms and guidelines
on
page 98.
Adjusting the castor stem
If the steering fork is loose the castor stem needs to be ad-
justed.
☞
For this tighten the screw of the castor stem, so that the
steering fork can still be turned, but the plate washers
still have effect.
3
3
1
3
2