Meyra 1.610, Руководство по техническому обслуживанию и ремонту

Страница: 30 / 104

30
SEAT DEPTH
Adjusting the seat depth through the posi-
tion of the back support
Position of the back support
Model 1.610 / 1.611 / 1.612 / 1.615
The seat depth can be adjusted by repositioning the back
support.
After removing the three attachment screws on both sides,
the back support, depending on version strap or shell, can
be positioned according to table <
Seat depth – Position of
the back support >.
☞
The assemble hole that is not used (X) is fit with a cover
cap.
Table: Seat depth – Position of the back support
Seat depth [cm] 40 43 46 49 53 53 56
Pos. back support belt [1] * 3 4 5 6 7
7
with seat profile
extension [3]
Pos. back support belt [1] *
French regulation
3 4 5 6 X
6
with seat profile
extension [3]
X
Pos. back shell [2] * 4 5 6 7 8
8
with seat profile
extension [3]
Pos. back shell [2] *
French regulation
4 5 6 7 X
7
with seat profile
extension [3]
X
* Corresponds to the rear hole of the adjustment plate (a)
Version: Back support strap Version: Back support shell
a
X
3
4
5
6
7
4
5
6
7
8
a
X
3
1 2