Meyer WOODCHUCK 2900, Инструкция по эксплуатации

Страница: 23 / 36

23
INSTALL FIREBRICK
Place firebrick into unit as follows:
1. Place two 2" thick bricks with bevel cuts against the rear wall of the firebox. See figure 17.
2. Place 1-1/2" thick bricks with bevel cuts against the outer front wall of the firebox. 526 Models will have two 4"x8"
bricks that will fit between the bevel cut bricks. 2900 Models will have three 4"x5-3/8" bricks that will fit between the
bevel cut bricks. 4000 Models with have just two 2" thick bricks with bevel cuts that will fit to the outer walls of the
firebox.
3. Place rectangular brick along side walls of the fireboxas illustrated. If rectangular bricks are two different widths,
then an equal number of each will go on both sides of the firebox.
FIGURE 16 INSTALL OPTIONAL SHAKER GRATE FOR MODEL 526
RETAINER
CENTER
RETAINER
RETAINER
RIGHT FRONT BAR
(NOTE LONG SHAFT ON
FRONT)
LEFT FRONT BAR
REAR BAR
HANDLE
REAR
FRAME
GEARS
LOCKNUTS
FRONT FRAME
FIGURE 17 INSTALL FIREBRICK