Meyer SX168720202 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 112

background image

Meyer Manufacturing Corporation

- 38 -

PB-SXI

8.1.4 Monthly Lubrication

Grease (2) jack assembly zerks located on the front

face of the jack and grease (2) hitch zerks.

Maintain oil level in the corner gearbox at the centerline

of the input shafts. Check regularly for any observable oil
leakage. If oil leakage is excessive, replace required input/
output shaft oil seals. Use ONLY EP #80-90 wt. gear lube oil or
an equivalent in the corner gearbox. Only lighter weight gear
lube oil may be used in temperatures lower than 20°F. Change
oil in the gearboxes after the first season of use and regularly
thereafter.

Maintain the lube level visible in the front gearbox sight

glass at 1/2 full. Check regularly for any observable leakage. If oil leakage is excessive, replace required input/output
shaft oil seals. Use ONLY SAE 90EP gear lube oil or an equivalent. A fill plug is provided. Change oil in the gearbox after
the first season of use and regularly thereafter.

Grease (1) nylon bushing supporting the rear shaft of the 3rd auger assembly. The zerk is grease line fitted to the

left rear corner of the tank below the light bracket.

Maintain the lube level in the (2) spinner gearboxes at 3/4 full. Check regularly for any observable leakage. If

leakage is excessive, replace required input/output shaft seals. Lubricate with semi-fluid EP lithium base gear grease.

Clean and repack the wheel hubs with axle grease annually. Grease the hub through the zerk in the hub monthly.

Be careful not to over grease and force the seal out of the back side of the hub.

Grease (2) T-post hold down sleeve zerks located above the cross channel on the underside of the spreader. The

zerks are located on the front and the rear of the sleeve.

L1

L1

L15

L16

L17

L18

L19

L20

L21

«
...
36
37
38
39
40
...
»

Содержание SX168720202

















































































































Отзывы:

Нет отзывов

Похожие инструкции для SX168720202

Бренд: EarthWay Страницы: 6

Бренд: EarthWay Страницы: 6

KAAN Standard Plus

Бренд: Kobil Страницы: 73

Бренд: ZKTeco Страницы: 40

Бренд: Gemalto Страницы: 29

Бренд: ZKTeco Страницы: 14

shindaiwa RS850W

Бренд: Echo Страницы: 20

Бренд: Echo Страницы: 20

Бренд: Echo Страницы: 20

Бренд: Sitecom Страницы: 7

Бренд: Hamlet Страницы: 2

Бренд: GARO Страницы: 9

Бренд: Rauch Страницы: 114

Бренд: HIKVISION Страницы: 14

Бренд: Axema Страницы: 9

Бренд: Rolls Страницы: 2

Бренд: Trejon Страницы: 36

Бренд: SPYKER Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды