Meyer SX168720202, Руководство владельца/оператора

Страница: 21 / 112

1-800-325-9103
PB-SXI - 21 - www.meyermfg.com
6.0 PRE-OPERATION
6.1 STATIC INSPECTION
Before operating the spreader for the first time and each time thereafter, check the following items:
1. Check that all safety signs are in good and legible condition.
2. Inspect the spreader for proper adjustments. (See 8.2 ADJUSTMENTS)
3. Lubricate the equipment. (See 8.1 LUBRICATION)
4. Make sure that all guards and shields are in place, secured and functioning as designed.
5. Check condition of all hydraulic components for leaks. Repair or replace as required
6. Check the hydraulic and gear box oil level. (See 8.1 LUBRICATION)
7. Remove any twine, wire or other material that has become entangled around the rear spinners and augers.
8. Check to see that no obstructions are present in the spreader. Be sure that there are no tools laying on or in the
spreader.
9. Verify that all electrical and hydraulic connections are tight and secure before operating.
10. Check that all hardware is in place and is tight.
11. Watch for any worn or cracked welds. If found, have qualified personnel repair immediately or replacement is
necessary.
12. Check all bearings for wear. Replace as needed.
13. Some parts will wear due to use. It is highly recommended to replace critical safety items such as a hitch that has worn
through the “Wear Plate” or is less than three quarters of its original thickness.
14. Check the tires and inflate to the recommended pressure.
15. Inspect the condition of axles, o-beams, spindles, and safety lighting. Repair or replace as required.
16. Check that the brakes are clean and clean them if necessary. (Brake Option Only)
DO NOT allow anyone to operate, service, inspect or otherwise
handle this spreader until all operators have read and understand all
of the instructional materials in this Operator’s and Parts Manual and
have been properly trained in its intended usage.
Verify that the spreader is securely fastened to the tractor / truck.
Verify that all electrical / hydraulic connections and bolts / hardware
are tight and securely fastened before operating the spreader.
Always keep all shields and guards in place and securely fastened.
Keep hands, feet and clothing away.
Wear safety glasses to prevent eye injury when any of the following
conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Tools are being used.
Hydraulic fluid escaping under pressure can have sufficient force to
cause injury. Keep all hoses and connections in good serviceable
condition. Failure to heed may result in serious personal injury or death.