Meyer SX168720202, Руководство владельца/оператора

Страница: 24 / 112

Meyer Manufacturing Corporation - 24 - PB-SXI
6.6 HITCHING TO TRACTOR
Move to the operator’s position, start the engine and release the parking brake.
Move the tractor in front of the spreader. Slowly move the tractor backwards towards the spreader and align the drawbar
with the implement’s hitch.
NOTE: Lower or raise the spreader jack to properly align the drawbar and hitch.
Fasten the spreader hitch to the tractor drawbar with a properly sized hitch pin with safety retainer. (Reference ANSI/
ASABE AD6489-3 Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 3: Tractor
drawbar.) (See your Trailer / Chassis manual for further details.)
Before operation and after hitching the tractor to the implement, connect the hydraulic hoses, light cord and PTO drive
shaft to the tractor. Slide the spring loaded locking collar onto the PTO yoke rearward, and then slide the yoke onto the
tractor PTO shaft. Release the spring loaded collar. Be sure the pins fall into the groove of the tractor PTO shaft and that
the collar snaps forward into the locked position. Move the tractor hydraulic controls to observe proper gate operation.
Connect any optional equipment as needed.
NOTE: If the controls operate the rear gate in the opposite direction to what you expect, reverse the hydraulic
hose connections at the tractor.
Remove the weight from the jack (jack is not to be used when spreader is loaded). Remove the jack from mount tube and
move to the transport storage tube on the front of the spreader drive enclosure. Store in a horizontal position.
6.7 START-UP AND SHUT-DOWN
6.7.1 Start-Up
Enter the tractor or truck and start the engine.
Slowly engage the PTO and operate at idle speed.
Do not allow anyone to stand between the tongue or hitch and the
tractor when backing up to the spreader.
DO NOT allow anyone to operate, service, inspect or otherwise handle
this spreader until all operators have read and understand all of the
instructional materials in this Operator’s And Parts Manual and have
been properly trained in its intended usage.
Before operating the spreader, look in all directions and make sure
no bystanders, especially small children are in the work area.
Disengage the hydraulic power, engage the machine’s parking brake,
stop the engine and make sure all moving components are
completely stopped before connecting, disconnecting, adjusting or
cleaning this equipment.
Always keep all shields and guards in place and securely fastened.
Keep hands, feet and clothing away.