background image

40

41  

The original purchaser’s sole and exclusive remedy against Meyer Products and its Distributors and Sub-

Distributors, and Meyer Products’ sole obligation for any and all claims, whether for breach of contract, 

warranty, tort (including negligence) or otherwise shall be limited to providing, through its authorized Distributor/

Sub-Distributor network, all labor and/or parts necessary to correct such defects free of charge. Any cost 

incurred in returning the product to an authorized Meyer® Distributor/Sub-Distributor is the responsibility of the 

original purchaser. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, WITHOUT 

LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD. NO WARRANTIES, 

WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED. 

Meyer Products disclaims liability beyond the remedies provided for in this limited warranty, and disclaims 

all liability for incidental, consequential, and special damages, including, without limitation, any liability for 

third-party claims against you for damages, for products not being available for use, or for lost profits. Meyer 

Products’ liability will be no more than the amount you paid for the product that is the subject of a claim; this 

is the maximum amount for which we are responsible. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Meyer Products Will Do: 

Meyer Products will repair any product that proves to be defective in materials 

or workmanship. In the event repair is not possible or practical (as determined by Meyer Products in its sole 

discretion), Meyer Products will either replace the product with a new product of similar model and price, or  

refund the full purchase price, as determined by Meyer Products.

Customer Responsibilities: 

Customer must keep the complete Snow Plow Package serviced/maintained 

as recommended by Meyer Products. A written record of service must be maintained, along with receipts for 

Meyer

®

 Snow Plows 

Limited Warranty

MEYER PRODUCTS, LLC

18513 Euclid Avenue
Cleveland, OH  44112

40

Содержание Path Pro2













































Отзывы: