SNOW PLOW STORAGE
1.
When snow plow is disconnected,
extend lift cylinder to end
of stroke and coat chrome rod with light grease.
This fills the
cylinder with hydraulic fluid and protects the interior and exterior
from rust and corrosion.
2.
Whenever Moldboard is disconnected, coat the exposed
portions of the power angling cylinder chrome rods with light
grease to protect them from corrosion.
3.
Coat all pivot pins and other wear points with chassis lubricant.
Be sure to grease all zerk fittings.
4.
Unplug electrical connection at power unit. Coat connection
with a dielectric compound to prevent corrosion and plug into
their corresponding weather plug.
5.
Reference past season summer maintenance on page 9 prior
to final storage.
-10-
