Meyer Boss 8200 RT Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 100

background image

Meyer Manufacturing Corporation

- 34 -

PB-8200-19

Unloading Into A Bunker

Keep moving forward to prevent forage from being carried underneath into the main apron chain return area.

7.4 UNHOOKING THE TRACTOR

1.

Park the implement on level ground. Put the tractor controls in neutral, set the parking brake, and turn the engine off
before dismounting.

2.

Place wheel chocks in front and in back of the implement wheels on opposite sides to prevent the implement from
rolling after the tractor is unhooked.

3.

Remove the hydraulic hose ends from the tractor hydraulic ports and secure the hose ends on the front of the box to
keep them clean.

4.

Remove the light cords and any optional equipment connections.

5.

Remove the jack from the storage mount and install it on the hitch tongue. Crank the jack down until the hitch lifts off
the tractor draw bar.

6.

Remove the hitch pin.

7.

Unhook safety chain from tractor drawbar and intermediate support.

8.

Slowly drive the tractor away from the implement.

7.5 STANDARD REAR DISCHARGE DOOR

Opening The Door

The rear discharge door opens automatically under load pressure and apron chain movement.

Closing The Door

When finished unloading, reduce engine speed to idle and disengage hydraulic power.

Move the tractor and forage box forward, away from the unloaded forage. When the main hydraulic power has been
turned off, hydraulic pressure will be relieved to allow the door to swing shut and the latches to engage the door latch
cogs to secure the door in the closed position.

Looking through the front of the box, or using the front plexiglass window for viewing, verify the rear gate has properly
latched. If the door latches are not automatically latching, move the washers on either side of the latch so that the latch is
centered in the main apron chain link. If the latch is bent or worn, See REAR GATE on page 56 of this manual for
replacement.

If the forage box becomes clogged, shut off all power to the forage
box and wait until all rotating components are completely stopped.
(See 5.4 SHUTOFF & LOCKOUT POWER on page 22.)

If any component fails, shut off all power to the forage box and move
the forage box to a safe work area. Repair or replace damaged
components before proceeding with unloading of the forage.

Keep hands, legs and feet from under tongue and hitch until jack is
locked into place.

«
...
32
33
34
35
36
...
»

Содержание Boss 8200 RT





































































































Отзывы:

Нет отзывов

Похожие инструкции для Boss 8200 RT

Бренд: Canta Страницы: 2

Бренд: YardCraft Страницы: 17

Бренд: Obdstar Страницы: 10

Бренд: B&K Страницы: 12

Бренд: UFO Страницы: 16

Бренд: Mainca Страницы: 21

Бренд: Daktronics Страницы: 30

Бренд: DAKOTA ULTRASONICS Страницы: 28

Бренд: SAMCHULLY Страницы: 48

Бренд: HAGS Страницы: 5

Бренд: HAGER WERKEN Страницы: 2

Бренд: iHealth Страницы: 8

DISHSTAR ADA-SEER

Бренд: Jackson Страницы: 2

Бренд: Taylor Страницы: 60

Бренд: TANDBERG Страницы: 23

Бренд: Backyard Play Systems Страницы: 73

Бренд: M-Audio Страницы: 12

Бренд: M-Audio Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды