Meyer Boss 8200 RT Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 100

background image

Meyer Manufacturing Corporation

- 22 -

PB-8200-19

5.4 SHUTOFF & LOCKOUT POWER

Any individual that will be adjusting, servicing, maintaining, or clearing an obstruction from this machine needs
to ensure that this machine stays safely “OFF” until the adjustment, service, or maintenance has been
completed, or when the obstruction has been cleared, and that all guards, shields, and covers have been
restored to their original position. The safety of all individuals working on or around this machine, including
family members, are affected. The following procedure will be referred to throughout this manual, so be familiar
with the following steps.

5.4.1 Shutoff & Lockout Power Recommendations

1.

Think, Plan and Check

a.

Think

through the entire procedure and identify all the steps that are required.

b.

Plan

what personnel will be involved, what needs to be shut down, what guards / shields need to be removed, and

how the equipment will be restarted.

c.

Check

the machine over to verify all power sources and stored energy have been identified including engines,

hydraulic and pneumatic systems, springs and accumulators, and suspended loads.

2.

Communicate -

Let everyone involved, including those working on or around this machine, that work is being done

which involves keeping this machine safely “OFF”.

3.

Power Sources

a.

LOCKOUT -

Shut off engines and take the key, or physically lock the start/on switch or control. Disconnect any

power sources which are meant to be disconnected (i.e. electrical, hydraulic, and PTO of pull-type units).

b.

TAGOUT -

Place a tag on the machine noting the reason for the power source being tagged out and what work is

being done. This is particularly important if the power source is not within your sight and/or will need to be isolated
for a longer period of time.

4.

Stored Energy -

Neutralize all stored energy from its power source. Ensure that this machine is level, set the parking

brake, and chock the wheels. Disconnect electricity, block moveable parts, release or block spring energy, release
pressure from hydraulic and pneumatic lines, and lower suspended parts to a resting position.

5.

Test -

Do a complete test and personally double check all of the above steps to verify that all of the power sources are

actually disconnected and locked out.

6.

Restore Power -

When the work has been completed, follow the same basic procedures, ensuring that all individuals

working on or around this machine are safely clear of the machine before locks and tags are removed and power is
restored.

It is important that everyone who works on this equipment is properly
trained to help ensure that they are familiar with this procedure and
that they follow the steps outlined above. This manual will remind you
when to Shutoff & Lockout Power.

«
...
20
21
22
23
24
...
»

Содержание Boss 8200 RT





































































































Отзывы:

Нет отзывов

Похожие инструкции для Boss 8200 RT

Бренд: Nederman Страницы: 89

Бренд: Nederman Страницы: 71

Бренд: Nederman Страницы: 131

Бренд: X-Cite Страницы: 2

RIDA qLine ZG2601

Бренд: R-Biopharm Страницы: 23

Бренд: R&S Страницы: 2677

Бренд: UniPix Страницы: 24

Бренд: ZOLL Страницы: 37

Бренд: Wacker Neuson Страницы: 34

Бренд: Wagan Страницы: 4

Бренд: Wachs Страницы: 22

Бренд: ABB Страницы: 33

Бренд: Magicfx Страницы: 25

Бренд: Valmont Structures Страницы: 8

Бренд: Gilson Страницы: 8

Бренд: TaiShan Страницы: 5

Бренд: Caimore Страницы: 23

Бренд: airwave Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды