Meyer Boss 8200 RT Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 100

background image

1-800-325-9103

PB-8200-19

- 33 -

www.meyermfg.com

7.3 REAR UNLOADING

NOTE: Unloading is best observed from the operator’s seat.

NOTE: The front of the forage box is open or is equipped with a plexiglass window to monitor forage level from

the operator’s seat.

Truck Mount: Make sure the selector valve knob is in the pushed in position.

Engage the tractor / truck hydraulics.

Place all tractor / truck controls in neutral, engage the parking
brake, and flip the switch on the control box to “Rear Unload”.

Once the load has started to move, release the parking brake,
move forward to prevent the silage from being carried
underneath into the main apron chain return area. The front of
the box has a plexiglass window for convenient observation.
Watch to verify the rear doors have properly released.

NOTE: Do not operate above the rated 1500 RPM engine

speed.

When finished unloading, reduce engine speed to idle, move
switch on control box to “Power Off” and disengage the truck /
tractor hydraulics. Move the forage box forward, away from the
unloaded pile of forage. When free, gravity will allow the door to
swing shut and the door latches to engage the apron chain
links, securing the door(s) in the closed position.

Exit the tractor / truck and verify that the door latches have engaged the apron chain links properly, securing the doors in
the closed position.

STAND CLEAR, the rear discharge door can spring open quickly and
with extreme force.

Keep all persons well clear of the rear discharge door, forage box and
unloading area.

The rear discharge door opens automatically by releasing its latches
as the main aprons begin to move.

Pressure of forage against the rear door causes it to spring open
very quickly.

Shutoff and lockout power before adjusting, servicing, maintaining,
or clearing an obstruction from this machine. Failure to heed may
result in serious personal injury or death.

Never enter the forage box without shutting power “OFF” to the
machine. (See 5.4 SHUTOFF & LOCKOUT POWER on page 22.)

Never use “LIVE” power to aid in the clean-out of a clogged machine.

The unloading process described is to be performed by the operator
alone. This will eliminate unexpected “start-ups” and minimize other
hazards that could result by more than one person in control.

CONTROL BOX

«
...
31
32
33
34
35
...
»

Содержание Boss 8200 RT





































































































Отзывы:

Нет отзывов

Похожие инструкции для Boss 8200 RT

Бренд: Olympus Страницы: 86

Бренд: K&K Страницы: 8

Бренд: ParaBody Страницы: 5

Бренд: Baileigh Industrial Страницы: 28

Бренд: Baileigh Industrial Страницы: 56

Бренд: XanLite Страницы: 4

Бренд: Gary Machinery Страницы: 14

Бренд: tayco Страницы: 111

Бренд: ubbink Страницы: 30

Бренд: rbd instruments Страницы: 18

McDonnell & Miller PSE-800-M

Бренд: Xylem Страницы: 20

Бренд: ABB Страницы: 112

Бренд: Berner Страницы: 30

Бренд: Kitagawa Страницы: 32

Бренд: Delfield Страницы: 24

LED MINI TRI PAR CAN 3 W

Бренд: Cameo Страницы: 110

Бренд: Allard Страницы: 12

Agilium Reactive 50K324-US

Бренд: Otto Bock Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды