Metz Astral 72 Slim Скачать руководство пользователя

Страница: 92 / 100

Problem

Possible cause

Remedy

TV set does not react
to commands from
the remote control

• No line of sight between the

remote control and the TV set.

• Sunlight is shining directly on

the infrared window of the TV
set.

• Batteries of the remote control

are exhausted.

• TV set has been switched off

with the main power switch.

• Fault in the internal processor.

• Remove any obstacles

between the units.

• Prevent sunlight from

shining on the set.

• Replace the batteries.
• Switch on the TV set

with the main power

switch.

• Switch off the TV set

with the main power

switch, wait a few

seconds and then switch

it on again.

Incorrect colours,
coloured areas at
edge of screen

• A strong magnetic field from

loudspeakers or other devices
in the vicinity.

• Move the loudspeakers

away from the TV set.

• If there are still coloured

areas, switch off the TV set
with the main power switch,
wait a few seconds and
then switch it on again.

The message "Enter
code" is displayed
when the TV set is
switched on.

• The childlock is active and was

programmed to disable all
stations.

• Enter the code you used

when programming the
childlock.

The TV set will not
switch to a selected
programme position.
A teddy bear is dis-
played instead.

• The childlock is active and was

programmed so that only the
stations shown in the list beside
the teddy bear may be selec-
ted.

• Enter the code you used

when programming the
childlock.

You have switched
off the TV set with
the

key, but the

green LED remains
on.

• EPG data are currently being

collected from the programmed
EPG station.

• None. When all data

have been collected, the
TV set will switch itself
off automatically.

Содержание Astral 72 Slim





































































































Результаты поиска

Содержание Astral 72 Slim

Отзывы:

Похожие инструкции для Astral 72 Slim

Бренды по названию

Популярные бренды

Metz Astral 72 Slim, Руководство по эксплуатации

Результаты поиска

Содержание Astral 72 Slim

Отзывы:

Похожие инструкции для Astral 72 Slim

Бренды по названию

Популярные бренды