MR-GW User Manual | EN
V 1.0 | Version 05/2020
Page 4 of 29
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
more Documentation: www.metz-connect.com
1
Preamble
1.1
About this User Manual
This document describes the operation of the MR-GW (Modbus RTU-Gateway), P/N 11083001. The description
contains information on the use and installation of the device. If you have any questions that cannot be
answered with the help of this manual, please contact the manufacturer for further information.
The stated installation and assembly regulations and guidelines apply to the Federal Republic of Germany. If
the device is being used abroad, the national regulations must be observed at the sole responsibility of the
system manufacturer or operator.
1.2
Document history
Version
Date
Author
Description
V 0.1
2020-04-29
MH
Pre-Version
V 1.0
2020-05-26
MH
MC-Search Utility, network settings
1.3
Safety instructions
For the installation and use of the device, the respectively valid industrial safety, accident prevention and VDE
regulations must be observed. Skilled workers or installers are advised that they must discharge themselves
properly before installing or servicing the equipment. Assembly and installation work on the devices may only
be carried out by qualified personnel, see section "qualified personnel". Every person who uses the device must
read the descriptions of this have read and understood this manual.
Warning of dangerous electrical voltage!
Improper connection may result in danger to life. Serious physical injury or considerable damage to
property may occur. Before working on the system, it must be disconnected from the power supply.
