MR-GW User Manual | EN
V 1.0 | Version 05/2020
Page 21 of 29
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
more Documentation: www.metz-connect.com
4.3.6.2
Reset and reassign password
The password entry can be deactivated by a jumper on the top of the device. For this purpose, the housing
cover must be removed and the jumper must be set to the
„ON”
position. The web interface can now be
accessed without a password being requested. After a new password has been assigned, the jumper must be
set to position
„OFF“
again. The new password is now active.
Figure 18 Password- jumper settings
4.3.6.3
Allowed Clients
The
Allowed client
connections allow you to add or block remote client IP addresses to prevent unauthorized
access. The access to the MR-GW is controlled by an IP address. This means that if a client's IP address is in the
accessible IP range, then the client is allowed to access the MR-GW.
Example 1:
Only a host with a specific IP address can access the MR-GW:
Network address of the clients
192.168.1.1
Subnet mask
255.255.255.255
Example 2:
Hosts in a specific subnet can access the MR-GW:
Network address of the clients
192.168.1.0
Subnet mask
255.255.255.0
