METVISA CFH.300 Series, Инструкция по эксплуатации

Страница: 14 / 28

14
After checking these items, follow the equipment operation procedure below:
• Connect the power cord to the electrical main;
• With the product to be cut, lift the vertical fastener by the handle and place the product
vertically in the guide, then, to secure it, lower the fastener;
• Loosen the handle of the horizontal fastener and adjust according to the measurement of
the product, leaving a distance of 3 to 5 mm between the fastener and the product, in order to keep
the product in a vertical position, but without preventing it from descending by gravity;
• Unlock the locking handle and through the slicer adjust the slice thickness. Then lock the
locking handle again;
• Turn the power switch to the “1” (on) position. At that moment, the equipment will perform
the cutting movement automatically;
• After the end of the process, turn off the equipment by pressing the on-off button in position
“0” (off).
ATTENTION!
Always keep the structure mounted and locked by the handles and constantly empty the
tray located on the inside of the structure, in this way, excess food is prevented from
overflowing and leakage from the motor, causing accidents and damage to the equipment.