manualshive.com logo in svg

Mettler Electronics Sys Stim 240, Инструкция по эксплуатации

Поделиться
Скачать
Mettler Electronics Sys Stim 240 Скачать руководство пользователя страница 59

Sys*Stim 240 Instruction Manual — Rev.I_09/23/19 

59 

Section 7—References 

References for Neuromuscular Electrical Stimulation: 

1.

 

Bélanger A: Therapeutic Electrophysical Agents: Evidence Behind Practice, Williams and 
Wilkins, A Walters Kluwer Business, 2010. 

2.

 

Cohn JC and Mullin C: Neuromuscular Applications for Electrical Stimulation, from Physical 
Agents for the Physical Therapist Assistant, FA Davis Company, 1996. 

3.

 

Gillespie CA: Foundations for Electrical Stimulation, from Physical Agents for the Physical 
Therapist Assistant, FA Davis Company, 1996. 

4.

 

Hooper PD: Physical Modalities-A Primer for Chiropractic, Williams & Wilkins, 1996 

5.

 

Kenna KM: Pain Management with Electrical Stimulation, from Physical Agents for the Physical 
Therapist Assistant, FA Davis Company, 1996. 

6.

 

Knight KL and Draper DO: Electrotherapy from Therapeutic Modalities: The Art and Science, 
Lippincott Williams & Wilkins, a Wolters Kluwer business, 2008. 

7.

 

Mehreteab TA, Weisberg J and Nelson A: Electrotherapy from Physical Agents: A 
Comprehensive Text for Physical Therapists, Appleton & Lange, 1994. 

8.

 

Mullin D and Gardner ER: Physiologic Basis of Electrical Stimulation, from Physical Agents for 
the Physical Therapist Assistant, FA Davis Company, 1996. 

9.

 

Prentice W: Therapeutic Modalities: For Sports Medicine and Athletic Training, Mc Graw Hill 
Companies, 2008. 

10.

 

Shapiro s: Electrical Currents from Rehabilitation: From Research to Practice, Elsevier, 2008. 

11.

 

Sparrow KJ: Electrotherapeutic Modalities: Electrotherapy and Iontophoresis, from Modalities 
for Therapeutic Intervention (Contemporary Perspectives in Rehabilitation), F.A. Davis 
Company, 2005. 

12.

 

Starkey C: Electrical Agents, from Therapeutic Modalities, FA Davis Company, 1999. 

13.

 

Stillwell GK: Electrotherapy from Krusen’s Handbook of Physical Medicine and Rehabilitation, 
W.B. Saunders Company, 1982. 

References for Laser and Light Therapy: 

1.

 

Baxter GD: Therapeutic Lasers, Elsevier Limited, 1994. 

2.

 

Behrens BJ: Therapeutic Use of Light: Ultraviolet and Cold Laser, from Physical Agents for the 
Physical Therapist Assistant, FA Davis Company, 1996. 

3.

 

Bélanger A: Therapeutic Electrophysical Agents: Evidence Behind Practice, Williams and 
Wilkins, A Walters Kluwer Business, 2010. 

4.

 

Bukowski EL and Dellagatta EM: Electromagnetic Radiation: Laser, Ultraviolet, and Diathermy 
from Modalities for Therapeutic Intervention (Contemporary Perspectives in Rehabilitation), 
F.A. Davis Company, 2005. 

5.

 

Cameron MH: Electromagnetic Radiation: Lasers and Light from Physical Agents in 
Rehabilitation: From Research to Practice, Elsevier, 2009. 

6.

 

Hooper PD: Physical Modalities A Primer for Chiropractic, Williams & Wilkins, 1996 

Содержание Sys Stim 240





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды