Sys*Stim 240 Instruction Manual — Rev.I_09/23/19
27
Section 4—Operating Instructions
Figure 4.1—Touch controls and Display
4.1 A Note about Electrodes
To ensure safe operation of the Sys*Stim 240, follow the recommendations listed below:
1.
We strongly encourage careful maintenance of the electrode system. This includes the lead
wires as well as the pads themselves. Worn cables and/or poor pads (or the wrong sized pads)
can have a significant impact upon treatment results.
2.
We recommend the use of Mettler electrodes with this product.
3.
Do not exceed the number of recommended uses listed on the instructions for V Trodes, EZ
Trodes or other reusable self–adhesive electrodes.
4.
Make sure that the entire surface of the electrode is contacting the patient.
5.
Do not use moist hot packs to secure electrodes.
6.
To avoid skin irritation due to high current density, do not use electrodes smaller in surface
area than the 2" in diameter V Trode or EZ Trode self-adhesive electrode (ME 2702).
7.
Thoroughly moisten the sponge in sponge electrodes prior to using with tap water. The sponge
should be moist. Squeeze out excess water from the sponge to prevent water from pooling
around or between the electrodes. Secure sponge electrodes to the patient’s skin with
electrode straps.
8.
Do not use conductive carbon electrodes with this product.
Содержание Sys Stim 240
