Mettler Electronics SYS-STIM 206, Инструкция по эксплуатации

Страница: 6 / 28

Mettler Electronics Corp.— Rev. E_4/4/13
6
The specifications and instructions presented in this manual are in effect
at the time of its publication. These instructions may be updated at any
time at the discretion of the manufacturer.
1.3 Safety Precautions
The Sys*Stim 206 operates with high voltages. Only qualified biomedical
technicians with training in neuromuscular stimulator service should
perform servicing of the Sys*Stim 206 or it should be returned directly to
the factory. To maximize safety during use, the unit should be plugged into
a grounded wall outlet. General safety guidelines for medical electronic
equipment should be followed.
Service may be obtained from the manufacturer by sending the Sys*Stim
206 in its original shipping container to Mettler Electronics Corp., 1333
South Claudina Street, Anaheim, CA 92805, ATTN: Service Department.
(Telephone toll free: (800) 854–9305, Email:
service@mettlerelectronics.com , Alternate telephone number: 1 (714)
533–2221 )
NOTE: All warranty repairs must be performed by Mettler Electronics
Corp. or by a service facility authorized by Mettler Electronics to perform
warranty repair work.
A service manual for the Sys*Stim 206 is available from Mettler Electronics
Corp. for a nominal charge.
1.4 Caution
Federal law restricts the sale of this device to, or on the order of, a
physician, dentist, veterinarian or any other practitioner licensed by law of
the state in which he practices.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous exposure to electrical
energy. The electric energy delivered by this device may possibly be
lethal. Treatment should be administered only under the direct supervision
of a health care professional.
1.5 Shipping Damage
Your new Sys*Stim 206 is shipped complete in one carton. Upon receipt,
please inspect the carton and the unit for visible and hidden damage. If
you discover any damage, hold all shipping materials, including the carton,
and call the shipping agent who delivered the unit. They are responsible
for all damage in transit; therefore, all claims should be filed directly with
them. The factory will not be responsible for any damage in shipment, nor
allow any adjustments unless proper formal claim has been filed by the
receiver against the carrier.