metrotek ETS-1000 Скачать руководство пользователя

Страница: 57 / 110

5.12 Testing TCP/IP

name. DNS lookup feature

allows to detect errors in NS-servers operation.

DNS lookup test is performed for specified domain name. If requested IP

address cannot be retrieved, all bits in IP address will be set to null.

Figure 5.59. DNS lookup test settings

•

Host

— name of host, IP address of which should be determined.

•

— IP address of the host, named above, determined during the test.

5.12.4

ARP monitor

ARP monitor utility allows to observe ARP replies that are transmitted in

the network and to get the IP and MAC addresses they contain. This data
form the table (see fig. 5.60).

Figure 5.60. ARP monitor screen

If any of entries presented in the table is not updated within one minute,

it will be deleted from the table.

To select port press

button.

The option is not included in the basic configuration; should be purchased additionally.

ETS-1000. Operations manual

Содержание ETS-1000















































































































Результаты поиска

Содержание ETS-1000

Отзывы:

Похожие инструкции для ETS-1000

Бренды по названию

Популярные бренды

metrotek ETS-1000, Руководство по эксплуатации

Результаты поиска

Содержание ETS-1000

Отзывы:

Похожие инструкции для ETS-1000

Бренды по названию

Популярные бренды