17
You can access the adjusting options for the TV signal in Menu
/ Setup /
TV Setup.
• On
Aspect Ratio
, select
4:3
or
16:9
depending on your screen format.
• If you have a 4:3 screen, you can choose on
widescreen
the way a 16:9
image will appear on your TV.
- The
CenterCutout
mode increases the image size without
distorting it to fill the whole screen.
- The
FullFrame
mode resizes the image horizontally in a 4:3 screen.
The image is therefore distorted.
- The
Letterbox
mode shows a full image, with black strips at the top
and bottom of the screen.
• On
Standard
, choose between
RGB
and
CVBS
. The CVBS mode
(composite) gives an image of lower quality than the RGB, but is compatible
with all TVs.
IMPORTANT !
If you have a 4:3 screen, do not adjust the
Aspect Ratio
to
16:9
!
Apart from TV channels, terrestrial digital also allows you to receive
radio channels.
As soon as you press the TV/RAD key, you are entering the radio
mode. From then on, the
CH
key will allow you to move from one
radio channel to another one. To go back to the TV mode, press the TV/RAD
key once more.
9 - Radios
10 - Channel Search
You should follow this process when you have lost a channel or if new channels
are emitted by operators.
• Go to Menu /
Setup
/
Service Setup
/
xxxx
/
Fullscan Replace Existing
Services
.
The receiver will search for new channels and add them.
8 - Adjusting the TV signal
