Miscellaneous Optional Setup Procedures
Hands Free (Presentation) Mode
To use the MS1633 scanner in presentation mode place the scanner in the presentation stand.
Placing the scanner in the stand automatically configures the scanner into presentation mode.
Once the scanner is in the stand and the IR sensor detects an object in the IR activation range
the scanner’s light automatically starts to flash as it attempts to scan the bar code. The scanner
continuously attempts to scan the bar code until either it succeeds or the bar code is removed
from the scanner’s field of view. When scanner successfully reads the bar code it will beep
once, the white LED will flash and the decoded data will be transmitted to the host.
MS1633 Focus BT Scanner Installation Guide
37
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
