Testing MS1633 FocusBT Scanner Connection
To test your MS1633 FocusBT scanners Bluetooth connection open up Microsoft Notepad or
Microsoft Word and scan the following barcode. If the barcode scans into the application then
your scanners Bluetooth connection has been established.
1 2 3 4 5 6 7 8 9 0
Code 128
Setting up the Scanner for Cerner Millennium Applications
Note:
If you are not running Cerner Millennium applications skip this section.
Scan the following barcodes to sets up the scanners suffix to a “
Horizontal TAB
” for most
Cerner Millennium applications. If this does not work for your application try scanning the
configuration barcodes for Cerner Classic.
³ 1 1 6 6 0 3
Disable CR Suffix
³ 1 1 6 6 1 0
Enable TAB Suffix
Setting up the Scanner for Cerner Classic Applications
Note:
If you are not running Cerner Classic applications skip this section.
Scan the following barcodes to set up the scanners suffix to a “
Carriage Return
” for Cerner
Classic applications.
³ 1 1 6 6 0 0
Disable TAB Suffix
³ 1 1 6 6 1 3
Enable CR Suffix
Please proceed to the section titled
“
Symbology Selection
”
26
MS1633 Focus BT Scanner Installation Guide
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
