MS1633 FocusBT Connection Setup (Continued)
31) Locate the “
COMReconnect
” icon on the Windows desktop and double click to open
the program.
32) Click the
Refresh
button in the lower right hand corner of the window to Display the
FocusBT scanner to be managed. Click the
Box
(if not already selected) to the left of
the “PortName” to select the scanner. Click
Close
to close the window.
33)
Bring up the Metrologic SoftWedge Utility by clicking the SoftWedge Icon in the Task
Tray in the lower right hand side of the Desktop. This will bring up the SoftWedge Utility
window.
24
MS1633 Focus BT Scanner Installation Guide
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
