manualshive.com logo in svg

Metrohm 2.947.0010, Руководство пользователя

Поделиться
Скачать
Metrohm 2.947.0010 Скачать руководство пользователя страница 17

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

947 Professional UV/VIS Detector Vario (2.947.00x0)

￭￭￭￭￭￭￭￭

9

3  Installation

3.1 

Setting up the instrument

3.1.1 

Packaging

The instrument is supplied in protective packaging together with the sepa-
rately packed accessories. Keep this packaging, as only this ensures safe
transportation of the instrument.

3.1.2 

Checks

Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.

3.1.3 

Location

The instrument has been developed for operation indoors. Do not use the
instrument in explosive environments.

Place the instrument in a location of the laboratory which is suitable for
operation and free of vibrations. Set up the instrument in such a way that
it is protected against corrosive atmosphere and contamination by chemi-
cals.

Protect the instrument against excessive temperature fluctuations and
direct sunlight.

The distance between the rear of the instrument and the wall must be
large enough to ensure air circulation on the cooling plate.

3.2 

Setup configurations

CAUTION

Changes to the setup configuration or the location

Injuries to the feet caused by an instrument or parts of an instrument
falling down.

￭

Disconnect all connections before you move or lift the instrument.

The 947 Professional UV/VIS Detector Vario can be used as a detector
with all the instruments of the Metrohm IC family. For many applications
with photometric detection, a post-column derivatization with the 943
Professional Thermostat / Reactor Vario (2.943.0110) is required. To build

Содержание 2.947.0010








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды