“twister” 2111 Media Converter 13
Apply Power
Power is provided to the “twister” unit from the 90-250V universal desktop
power supply module. This power module is equipped with a S760 hollow-
type plug for insertion into the DC jack located on the back of the “twister”
unit and standard IEC 320-type AC power receptacle.
When making power connections, it is recommended that the DC power
cord be connected to the DC input jack located on the back of the “twister”
media converter before making the AC connection to the outlet.
PWR
DC INPUT/5VDC
OFF
ON
TS
P
Upon receiving power, the “twister” media converter goes into normal
operation mode and automatically provides the appropriate signal
translation between the connected network segments.
Be sure to verify correct segment connectivity via the link (LK) LEDs on
the front of the unit.
If an additional extension cord is used to connect the power module to the
power source, the following guidelines must be followed.
While one end of the AC power cord can be fitted with whatever plug
is standard for the country of operation, the end that connects to the
“twister” power supply module must have a female plug that fits this
type of AC receptacle.
6
