“twister” 2111 Media Converter 5
2
Installation Guide
Follow the simple steps outlined in this section of the guide to install and start
using your Metrobility “twister” media converter.
Unpack the “twister” and Accessories
Check that the following components have been included with your order:
• “twister” 2111 media converter
• Power supply
• Power cord
• Four (4) rubber feet
Your order has been provided with the safest possible packaging, but
shipping damage does occasionally occur. Inspect your order carefully. If
you discover any shipping damage, notify the carrier and follow their
instructions for damage and claims. Save the original shipping carton if
return or storage of the unit is necessary.
Attach the Rubber Feet
The “twister” 2111 is shipped with four rubber feet. To install the feet, turn
the “twister” upside-down. Peel the self-adhesive rubber feet from the paper
strip and attach one foot to each corner on the bottom of the “twister” 2111.
Installing the feet provides an air gap which helps to cool the unit, adds
stability, and prevents marring and scratching of the desktop surface.
Choose an Appropriate Location
The “twister” 2111 media converter is intended for use in an office or
industrial environment. The unit must be located within six (6) feet of the
AC power source being used and placed as far away as possible from
electrical noise generating equipment such as copiers, electrostatic printers,
and other motorized equipment. If exposed twisted-pair wiring is used
nearby, the wiring should be routed as far away as possible from power
cords and data cables to minimize interference.
The units may be oriented in any manner that permits you to make physical
connection to the power supply and leaves a minimum of six (6) inches of
space for proper ventilation.
TUV Compliance Note: For pluggable equipment, the socket outlet must be installed
near the equipment and be easily accessible.
Bei Geräten mit Steckanschluß muß die Steckdose nahe dem Gerät angebracht und
leicht zugänglich sein.
1
3
