MI 3311 GammaPAT
Single test
28
5 Single test
In a Single test mode individual tests can be performed. This is especially helpful for
troubleshooting.
5.1 Performing measurements in single test mode
Select appropriate Single test in Single test Main menu.
Figure 1.22: Single test Main menu
Keys:
/
Selects a single test.
TEST
Enters
Single test Measuring menu.
ESC
Returns to
Main menu
.
A single test can be started from any Single test measuring menu. Before carrying out a
test the parameters / limits can be edited.
Figure 1.23: Example of single test measuring menu
Keys:
TAB
Selects a parameter.
/
Changes a parameter / limit.
TEST
Starts a single test.
ESC
Returns to
Single test Main menu
.
Note:
Last set parameters will be stored automatically.
Single measurements are stored in the same way as autotest results. See chapter
7.1
Saving autotest results
for more information.
